Sectional Beams

This beam is an 12ft Low Profile section beam. It is made up of two 6ft Sections.  It has a third support in the middle that is the width of the beam and completely hidden underneath.  Our raised beam legs can be added to this beam at any time.

The beam is made using cross grain laminated wood construction.  The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes the padding, covering and shape.

The padding is closed cell polyethylene foam. The same padding that is used on competition beams. It is covered with a heavy grade synthetic suede material. The material is durable and easy to clean. The work surface is 4 in. wide and the beam is 7 in high.

 The support braces are 12 in. wide and made of steel. The beam core is pre-drilled for our higher metal beam legs which can be added at a later date. This will make a great practice beam.

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Legs
• Cross Grain Laminated Wood Construction
• Competition Oval Shaped Sides
• 12 ft. Long x 4 in. wide x 7 in. high
• Metal Legs
• Material seams on bottom are covered with wood trim for a finished look.
• No exposed staples
• Weight Limit 250 lbs. 

Specifications:

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Support Braces
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 16 ft. Long x 4 in. wide (Made of 2 - 8ft sections)
• Weight Limit 350 lbs.

 16ft sectional suede balance beam with raised metal legs. The work surface is 4 in. wide. 

Beam height is measured from the top of the beam to the floor. It has a padded top and is covered with heavy-grade synthetic suede material. The material is durable and easy to clean. 16ft Sectional Balance Beam This beam is constructed of two 8ft sections joined in the middle and secured from the bottom and supported by a center support.

The beam is made using cross-grain laminated wood construction. This gives the beam its strength and prevents warping or twisting. The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes the padding, covering, and shape. They are made of 12 gauge structural steel with rubber end caps to protect the flooring beneath. This will make a great practice beam.

12ft Sectional Raised Balance Beam

This beam is constructed of two 6ft sections joined in the middle and secured from the bottom and supported by a center support. 

The beam is made using cross grain laminated wood construction. This gives the beam its strength and prevents warping or twisting.The core is planed and sanded to the competition oval beam shape.  Our beams are built as close as possible to competition beams for a realistic training experience.  This includes the padding, covering and shape.

The support braces for the 12" beam legs are 18 in. wide and all other beam leg heights are 24" wide.  They are made of 12 gauge structural steel with rubber end caps to protect the flooring beneath.   This will make a great practice beam.

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Support Braces
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 12 ft. Long x 4 in. wide (Made of 2 - 6ft sections)
• Steel Support Braces (Available in Four Heights 12", 18", 24" and an adjustable leg that adjust from 15" to 30" in 3" increments.) 
• Material seams on bottom are covered with wood trim for a finished look.
• No exposed staples
• Weight Limit 350 lbs.

Specifications:

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Support Braces
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 16 ft. Long x 4 in. wide (Made of 2 - 8ft sections)
• Steel Support Braces (Available in Four Heights 12", 18", 24" and an adjustable leg that adjust from 15" to 30" in 3" increments.) 
• No exposed staples
• Weight Limit 350 lbs.

16ft sectional suede balance beam with raised metal legs. The work surface is 4 in. wide and the beam is available in fixed heights of 12", 18", 24" and an adjustable height 30" Leg. The adjustable 30" leg adjusts from 15" up to 30" in 3" increments.

Beam height is measured from the top of the beam to the floor. It has a padded top and is covered with a heavy grade synthetic suede material. The material is durable and easy to clean. 16ft Sectional Balance Beam This beam is constructed of two 8ft sections joined in the middle and secured from the bottom and supported by a center support.

The beam is made using cross grain laminated wood construction. This gives the beam its strength and prevents warping or twisting.The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes the padding, covering and shape. The support braces for the 12" beam legs are 18 in. wide and all other beam leg heights are 24" wide. They are made of 12 gauge structural steel with rubber end caps to protect the flooring beneath. This will make a great practice beam.

Specifications:

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Support Braces
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 16 ft. Long x 4 in. wide (Made of 2 - 8ft sections)
• Steel Support Braces (Available in Four Heights 12", 18", 24" and an adjustable leg that adjust from 15" to 30" in 3" increments.) 
• No exposed staples
• Weight Limit 350 lbs.

4' x 20' x 2" CUSTOM FOLDING PANEL MAT

Mat configuration is a custom design from The Beam Store. The mats cover the metal beam legs and extend past the end of the beam on both ends. This provides 100% mat coverage around the beam.

All of our folding mats are designed and manufactured with the best materials available. We don't make different quality mats such as "regular" and "firm". All of our mats will be what other companies sell as their best "firm" mat. We use 18 oz. vinyl coated nylon (heavy vinyl) for the cover.

We reinforce all wear points such as corners. Our mat tops don't have any sewed seams except along the edges. We use 2" thick polyethylene foam.

• 4' x 20' Folding Panels
• Velcro on two sides
• 18 oz vinyl (Heavy Duty)

16ft sectional suede balance beam with raised metal legs. The work surface is 4 in. wide and the beam is available in fixed heights of 12", 18", 24" and an adjustable height 30" Leg. The adjustable 30" leg adjusts from 15" up to 30" in 3" increments.

Beam height is measured from the top of the beam to the floor. It has a padded top and is covered with a heavy grade synthetic suede material. The material is durable and easy to clean. 16ft Sectional Balance Beam This beam is constructed of two 8ft sections joined in the middle and secured from the bottom and supported by a center support.

The beam is made using cross grain laminated wood construction. This gives the beam its strength and prevents warping or twisting.The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes the padding, covering and shape. The support braces for the 12" beam legs are 18 in. wide and all other beam leg heights are 24" wide. They are made of 12 gauge structural steel with rubber end caps to protect the flooring beneath. This will make a great practice beam.