All Beams

Low profile folding balance beam. It is 8ft long when unfolded. The padding is closed cell polyethylene foam.  The same padding that is used on competition beams.  It is covered with a heavy-grade synthetic suede material for the look and feel of a regulation beam.  The material is durable and easy to clean.

It weighs approximately 16lbs giving it the weight of foam and the durability of real wood construction. It has attached handles that tuck underneath when in use. The work surface is 4in wide and has sloping sides. It is 6in wide at the bottom and is 3in high. The hinge mechanism is made of steel.

The beam can be folded and stored flat underneath a bed, in a closet, or easily folded and taken in a car.

This will make a great practice beam. 

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Cross Grain Laminated Wood Construction
• Wood Core (Much Better Than Foam)
• 8ft Long x 4in wide on top x 3in high
• Material seams on the bottom are covered No exposed staples
• Weight Limit 250lbs

We manufacture the best training beam in the world!

Here’s why:

Strength – Wood core with a weight capacity of  250lbs.  No center support is needed and this allows a mat to slide underneath the beam.  We use almost twice as much wood in our beam as our nearest competitor.  The beam won’t flex or bend when doing leaps or jumps.

Padding - We use the same padding as competition beams.  This gives a realistic feeling on her feet and makes it easy to go from a training beam to a competition beam.

Cover – Heavy grade suede.  Provides excellent durability and great non-slip traction.

Shape - Our beams have curved sides just like competition beams.  This will affect her hand grip and provides a more realistic training experience.

Reinforced Ends -   This is where most of the wear occurs on beams.  This feature will greatly extend the life of your beam

Warranty – All of our beams come with a two-year transferrable warranty.

Safety -   All of our beam designs have been tested.  Support braces are made of steel with rubber pads.  Custom matting is available to go all the way around the beam.

The beam is made using cross-grain laminated wood construction. This gives the beam its strength and prevents warping or twisting. No center support is needed. The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes padding, covering, and shape.

The padding is closed cell polyethylene foam. The same padding that is used on competition beams. It is covered with a heavy grade synthetic suede material. The material is durable and easy to clean. The work surface is 4in. wide and the beam is 7in high.

The support braces are 12in wide and made of steel. The beam core is pre-drilled for our higher metal beam legs which can be added at a later date. This will make a great practice beam.

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Legs
• Cross Grain Laminated Wood Construction
• Competition Oval Shaped Sides
• 8ft  x 4in wide x 7in high
• Metal Legs
• Material seams on the bottom are covered
• No exposed staples
• Weight Limit 250lbs

We manufacture the best training beam in the world!

Here's why:

Strength - Wood core with a weight capacity of 250lbs. No center support is needed and this allows a mat to slide underneath the beam. We use almost twice as much wood in our beam as our nearest competitor. The beam won't flex or bend when doing leaps or jumps.

Padding - We use the same padding as competition beams. This gives a realistic feeling on her feet and makes it easy to go from a training beam to a competition beam.

Cover - Heavy grade suede. Provides excellent durability and great non-slip traction.

Shape - Our beams have curved sides just like competition beams. This will affect her hand grip and provides a more realistic training experience.

Reinforced Ends - This is where most of the wear occurs on beams. This feature will greatly extend the life of your beam

Warranty - All of our beams come with a two-year transferrable warranty.

Safety - All of our beam designs have been tested. Support braces are made of steel with rubber pads. Custom matting is available to go all the way around the beam.



The beam is made using cross-grain laminated wood construction. This gives the beam its strength and prevents warping or twisting. No center support is needed. The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes the padding, covering, and shape.

The padding is closed cell polyethylene foam. The same padding that is used on competition beams. It is covered with heavy-grade synthetic suede material. The material is durable and easy to clean. The work surface is 4 in. wide and the beam is available in four different heights.

The support braces are 18in wide and made of 12 gauge structural steel with rubber end caps to protect the flooring beneath. Also included with the beam are a set of our low-profile legs. This will make a great practice beam.

• Beam Includes a Set of Low Profile Legs
• Heavy Grade Synthetic Suede Covering
• Padded Top
• Felt Padding on Support Braces
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 8ft Long x 4in wide
• Steel Support Braces (Available in Four Heights)
• Material seams on the bottom are covered with wood trim for a finished look.
• No exposed staples
• Weight Limit 250lbs
• Proudly Made in the USA

The beam is made using cross-grain laminated wood construction. This gives the beam its strength and prevents warping or twisting. No center support is needed. The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes padding, covering, and shape.

The padding is closed cell polyethylene foam. The same padding that is used on competition beams. It is covered with a heavy grade synthetic suede material. The material is durable and easy to clean. The work surface is 4in wide and the beam is 7in high.

The support braces are 12in wide and made of steel. The legs are painted to match the beam color. The beam core is pre-drilled for our higher metal beam legs which can be added at a later date. This will make a great practice beam.

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Legs
• Cross Grain Laminated Wood Construction
• Competition Oval Shaped Sides
• 8ft Long x 4in wide x 7in high
• Metal Legs
• Material seams on the bottom are covered with wood trim for a finished look.
• No exposed staples
• Weight Limit 250 lbs.
   

 4ft x 6ft x 2in FOLDING PANEL MAT 

12ft Sectional Raised Balance Beam

This beam is constructed of two 6ft sections joined in the middle and secured from the bottom and supported by a center support. 

The beam is made using cross grain laminated wood construction. This gives the beam its strength and prevents warping or twisting.The core is planed and sanded to the competition oval beam shape.  Our beams are built as close as possible to competition beams for a realistic training experience.  This includes the padding, covering and shape.

The support braces for the 12" beam legs are 18 in. wide and all other beam leg heights are 24" wide.  They are made of 12 gauge structural steel with rubber end caps to protect the flooring beneath.   This will make a great practice beam.

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Support Braces
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 12 ft. Long x 4 in. wide (Made of 2 - 6ft sections)
• Steel Support Braces (Available in Four Heights 12", 18", 24" and an adjustable leg that adjust from 15" to 30" in 3" increments.) 
• Material seams on bottom are covered with wood trim for a finished look.
• No exposed staples
• Weight Limit 350 lbs.

Specifications:

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Support Braces
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 16 ft. Long x 4 in. wide (Made of 2 - 8ft sections)
• Steel Support Braces (Available in Four Heights 12", 18", 24" and an adjustable leg that adjust from 15" to 30" in 3" increments.) 
• No exposed staples
• Weight Limit 350 lbs.

16ft sectional suede balance beam with raised metal legs. The work surface is 4 in. wide and the beam is available in fixed heights of 12", 18", 24" and an adjustable height 30" Leg. The adjustable 30" leg adjusts from 15" up to 30" in 3" increments.

Beam height is measured from the top of the beam to the floor. It has a padded top and is covered with a heavy grade synthetic suede material. The material is durable and easy to clean. 16ft Sectional Balance Beam This beam is constructed of two 8ft sections joined in the middle and secured from the bottom and supported by a center support.

The beam is made using cross grain laminated wood construction. This gives the beam its strength and prevents warping or twisting.The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes the padding, covering and shape. The support braces for the 12" beam legs are 18 in. wide and all other beam leg heights are 24" wide. They are made of 12 gauge structural steel with rubber end caps to protect the flooring beneath. This will make a great practice beam.

Specifications:

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Support Braces
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 16 ft. Long x 4 in. wide (Made of 2 - 8ft sections)
• Steel Support Braces (Available in Four Heights 12", 18", 24" and an adjustable leg that adjust from 15" to 30" in 3" increments.) 
• No exposed staples
• Weight Limit 350 lbs.

4' x 20' x 2" CUSTOM FOLDING PANEL MAT

Mat configuration is a custom design from The Beam Store. The mats cover the metal beam legs and extend past the end of the beam on both ends. This provides 100% mat coverage around the beam.

All of our folding mats are designed and manufactured with the best materials available. We don't make different quality mats such as "regular" and "firm". All of our mats will be what other companies sell as their best "firm" mat. We use 18 oz. vinyl coated nylon (heavy vinyl) for the cover.

We reinforce all wear points such as corners. Our mat tops don't have any sewed seams except along the edges. We use 2" thick polyethylene foam.

• 4' x 20' Folding Panels
• Velcro on two sides
• 18 oz vinyl (Heavy Duty)

16ft sectional suede balance beam with raised metal legs. The work surface is 4 in. wide and the beam is available in fixed heights of 12", 18", 24" and an adjustable height 30" Leg. The adjustable 30" leg adjusts from 15" up to 30" in 3" increments.

Beam height is measured from the top of the beam to the floor. It has a padded top and is covered with a heavy grade synthetic suede material. The material is durable and easy to clean. 16ft Sectional Balance Beam This beam is constructed of two 8ft sections joined in the middle and secured from the bottom and supported by a center support.

The beam is made using cross grain laminated wood construction. This gives the beam its strength and prevents warping or twisting.The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes the padding, covering and shape. The support braces for the 12" beam legs are 18 in. wide and all other beam leg heights are 24" wide. They are made of 12 gauge structural steel with rubber end caps to protect the flooring beneath. This will make a great practice beam.

Specifications:

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Support Braces
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 16 ft. Long x 4 in. wide (Made of 2 - 8ft sections)
• Steel Support Braces (Available in Four Heights 12", 18", 24" and an adjustable leg that adjust from 15" to 30" in 3" increments.) 
• No exposed staples
• Weight Limit 350 lbs.

4' x 20' x 2" CUSTOM FOLDING PANEL MAT

Mat configuration is a custom design from The Beam Store. The mats cover the metal beam legs and extend past the end of the beam on both ends. This provides 100% mat coverage around the beam.

All of our folding mats are designed and manufactured with the best materials available. We don't make different quality mats such as "regular" and "firm". All of our mats will be what other companies sell as their best "firm" mat. We use 18 oz. vinyl coated nylon (heavy vinyl) for the cover.

We reinforce all wear points such as corners. Our mat tops don't have any sewed seams except along the edges. We use 2" thick polyethylene foam.

• 4' x 20' Folding Panels
• Velcro on two sides
• 18 oz vinyl (Heavy Duty)

16ft sectional suede balance beam with raised metal legs. The work surface is 4 in. wide and the beam is available in fixed heights of 12", 18", 24" and an adjustable height 30" Leg. The adjustable 30" leg adjusts from 15" up to 30" in 3" increments.

Beam height is measured from the top of the beam to the floor. It has a padded top and is covered with a heavy grade synthetic suede material. The material is durable and easy to clean. 16ft Sectional Balance Beam This beam is constructed of two 8ft sections joined in the middle and secured from the bottom and supported by a center support.

The beam is made using cross grain laminated wood construction. This gives the beam its strength and prevents warping or twisting.The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes the padding, covering and shape. The support braces for the 12" beam legs are 18 in. wide and all other beam leg heights are 24" wide. They are made of 12 gauge structural steel with rubber end caps to protect the flooring beneath. This will make a great practice beam.