Balance Beams Low

We manufacture the best training beam in the world!

Here’s why:

Strength – Wood core with a weight capacity of  250lbs.  No center support is needed and this allows a mat to slide underneath the beam.  We use almost twice as much wood in our beam as our nearest competitor.  The beam won’t flex or bend when doing leaps or jumps.

Padding - We use the same padding as competition beams.  This gives a realistic feeling on her feet and makes it easy to go from a training beam to a competition beam.

Cover – Heavy grade suede.  Provides excellent durability and great non-slip traction.

Shape - Our beams have curved sides just like competition beams.  This will affect her hand grip and provides a more realistic training experience.

Reinforced Ends -   This is where most of the wear occurs on beams.  This feature will greatly extend the life of your beam

Warranty – All of our beams come with a two-year transferrable warranty.

Safety -   All of our beam designs have been tested.  Support braces are made of steel with rubber pads.  Custom matting is available to go all the way around the beam.

The beam is made using cross-grain laminated wood construction. This gives the beam its strength and prevents warping or twisting. No center support is needed. The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes padding, covering, and shape.

The padding is closed cell polyethylene foam. The same padding that is used on competition beams. It is covered with a heavy grade synthetic suede material. The material is durable and easy to clean. The work surface is 4in. wide and the beam is 7in high.

The support braces are 12in wide and made of steel. The beam core is pre-drilled for our higher metal beam legs which can be added at a later date. This will make a great practice beam.

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Legs
• Cross Grain Laminated Wood Construction
• Competition Oval Shaped Sides
• 8ft  x 4in wide x 7in high
• Metal Legs
• Material seams on the bottom are covered
• No exposed staples
• Weight Limit 250lbs

This beam is an 12ft Low Profile section beam. It is made up of two 6ft Sections.  It has a third support in the middle that is the width of the beam and completely hidden underneath.  Our raised beam legs can be added to this beam at any time.

The beam is made using cross grain laminated wood construction.  The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes the padding, covering and shape.

The padding is closed cell polyethylene foam. The same padding that is used on competition beams. It is covered with a heavy grade synthetic suede material. The material is durable and easy to clean. The work surface is 4 in. wide and the beam is 7 in high.

 The support braces are 12 in. wide and made of steel. The beam core is pre-drilled for our higher metal beam legs which can be added at a later date. This will make a great practice beam.

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Legs
• Cross Grain Laminated Wood Construction
• Competition Oval Shaped Sides
• 12 ft. Long x 4 in. wide x 7 in. high
• Metal Legs
• Material seams on bottom are covered with wood trim for a finished look.
• No exposed staples
• Weight Limit 250 lbs. 

The beam consists of one standard eight foot beam and one four foot beam. The beams connect with a inner connecting brace that is secured from the bottom of the beam. It can be assembled or disassembled in less than two minutes. 

It is made using cross grain laminated wood construction. This gives the beam its strength and prevents warping or twisting.  The core is planed and sanded to the competition oval beam shape.  Our beams are built as close as possible to competition beams for a realistic training experience.  This includes the padding, covering and shape.

The padding is closed cell polyethylene foam.  The same padding that is used on competition beams.  It is covered with a heavy grade synthetic suede material. The material is durable and easy to clean. The work surface is 4in wide and the beam is 7in high.

The support braces are 12in wide and made of steel with rubber caps.  This will make a great practice beam.

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 12ft long x 4in wide x 7in high
• Material seams on bottom are covered with wood trim for a finished look.
• No exposed staples
• Weight Limit 250 lbs.

The shipping rates listed on our website are for Canada. If your item needs to ship to an international address please call or email us for a shipping quote.

Specifications:

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Support Braces
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 16 ft. Long x 4 in. wide (Made of 2 - 8ft sections)
• Weight Limit 350 lbs.

 16ft sectional suede balance beam with raised metal legs. The work surface is 4 in. wide. 

Beam height is measured from the top of the beam to the floor. It has a padded top and is covered with heavy-grade synthetic suede material. The material is durable and easy to clean. 16ft Sectional Balance Beam This beam is constructed of two 8ft sections joined in the middle and secured from the bottom and supported by a center support.

The beam is made using cross-grain laminated wood construction. This gives the beam its strength and prevents warping or twisting. The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes the padding, covering, and shape. They are made of 12 gauge structural steel with rubber end caps to protect the flooring beneath. This will make a great practice beam.