Gymnastics

48" Replacement Bar for our Basic and Advanced High Bar. Includes Bar and Screws.

60" Replacement Ballet Wood Bar

Our 24in Parallette workout bars are made of 1 1/2in hardwood with a steel frame. They are 9in high. The compact design allows for easy transportation and storage.

Low profile folding balance beam. It is 8ft long when unfolded. The padding is closed cell polyethylene foam.  The same padding that is used on competition beams.  It is covered with a heavy-grade synthetic suede material for the look and feel of a regulation beam.  The material is durable and easy to clean.

It weighs approximately 16lbs giving it the weight of foam and the durability of real wood construction. It has attached handles that tuck underneath when in use. The work surface is 4in wide and has sloping sides. It is 6in wide at the bottom and is 3in high. The hinge mechanism is made of steel.

The beam can be folded and stored flat underneath a bed, in a closet, or easily folded and taken in a car.

This will make a great practice beam. 

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Cross Grain Laminated Wood Construction
• Wood Core (Much Better Than Foam)
• 8ft Long x 4in wide on top x 3in high
• Material seams on the bottom are covered No exposed staples
• Weight Limit 250lbs

Our Parallettes have a 1 1/2in diameter hardwood bar and steel frame. Our bars allow gymnasts to practice such moves as reverse grip changes, pirouettes, press handstands, and more.

Our Made in the USA Oversplits training ladder is a great training aid in improving flexibilty, control and form.  The ladder is made of 2" steel Tubing with 1 1/2" Hardwood bars that are set at heights of 8", 18" and 24".  Included is a removable pad.  The base is 24" wide and very stable.

We manufacture the best training beam in the world!

Here’s why:

Strength – Wood core with a weight capacity of  250lbs.  No center support is needed and this allows a mat to slide underneath the beam.  We use almost twice as much wood in our beam as our nearest competitor.  The beam won’t flex or bend when doing leaps or jumps.

Padding - We use the same padding as competition beams.  This gives a realistic feeling on her feet and makes it easy to go from a training beam to a competition beam.

Cover – Heavy grade suede.  Provides excellent durability and great non-slip traction.

Shape - Our beams have curved sides just like competition beams.  This will affect her hand grip and provides a more realistic training experience.

Reinforced Ends -   This is where most of the wear occurs on beams.  This feature will greatly extend the life of your beam

Warranty – All of our beams come with a two-year transferrable warranty.

Safety -   All of our beam designs have been tested.  Support braces are made of steel with rubber pads.  Custom matting is available to go all the way around the beam.

The beam is made using cross-grain laminated wood construction. This gives the beam its strength and prevents warping or twisting. No center support is needed. The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes padding, covering, and shape.

The padding is closed cell polyethylene foam. The same padding that is used on competition beams. It is covered with a heavy grade synthetic suede material. The material is durable and easy to clean. The work surface is 4in. wide and the beam is 7in high.

The support braces are 12in wide and made of steel. The beam core is pre-drilled for our higher metal beam legs which can be added at a later date. This will make a great practice beam.

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Legs
• Cross Grain Laminated Wood Construction
• Competition Oval Shaped Sides
• 8ft  x 4in wide x 7in high
• Metal Legs
• Material seams on the bottom are covered
• No exposed staples
• Weight Limit 250lbs

We manufacture the best training beam in the world!

Here's why:

Strength - Wood core with a weight capacity of 250lbs. No center support is needed and this allows a mat to slide underneath the beam. We use almost twice as much wood in our beam as our nearest competitor. The beam won't flex or bend when doing leaps or jumps.

Padding - We use the same padding as competition beams. This gives a realistic feeling on her feet and makes it easy to go from a training beam to a competition beam.

Cover - Heavy grade suede. Provides excellent durability and great non-slip traction.

Shape - Our beams have curved sides just like competition beams. This will affect her hand grip and provides a more realistic training experience.

Reinforced Ends - This is where most of the wear occurs on beams. This feature will greatly extend the life of your beam

Warranty - All of our beams come with a two-year transferrable warranty.

Safety - All of our beam designs have been tested. Support braces are made of steel with rubber pads. Custom matting is available to go all the way around the beam.



The beam is made using cross-grain laminated wood construction. This gives the beam its strength and prevents warping or twisting. No center support is needed. The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes the padding, covering, and shape.

The padding is closed cell polyethylene foam. The same padding that is used on competition beams. It is covered with heavy-grade synthetic suede material. The material is durable and easy to clean. The work surface is 4 in. wide and the beam is available in four different heights.

The support braces are 18in wide and made of 12 gauge structural steel with rubber end caps to protect the flooring beneath. This will make a great practice beam.

• Beam Includes a Set of Low Profile Legs
• Heavy Grade Synthetic Suede Covering
• Padded Top
• Felt Padding on Support Braces
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 8ft Long x 4in wide
• Steel Support Braces (Available in Four Heights)
• Material seams on the bottom are covered with wood trim for a finished look.
• No exposed staples
• Weight Limit 250lbs
• Proudly Made in the USA

This beam is an 12ft Low Profile section beam. It is made up of two 6ft Sections.  It has a third support in the middle that is the width of the beam and completely hidden underneath.  Our raised beam legs can be added to this beam at any time.

The beam is made using cross grain laminated wood construction.  The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes the padding, covering and shape.

The padding is closed cell polyethylene foam. The same padding that is used on competition beams. It is covered with a heavy grade synthetic suede material. The material is durable and easy to clean. The work surface is 4 in. wide and the beam is 7 in high.

 The support braces are 12 in. wide and made of steel. The beam core is pre-drilled for our higher metal beam legs which can be added at a later date. This will make a great practice beam.

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Legs
• Cross Grain Laminated Wood Construction
• Competition Oval Shaped Sides
• 12 ft. Long x 4 in. wide x 7 in. high
• Metal Legs
• Material seams on bottom are covered with wood trim for a finished look.
• No exposed staples
• Weight Limit 250 lbs. 

The beam is made using cross-grain laminated wood construction. This gives the beam its strength and prevents warping or twisting. No center support is needed. The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes padding, covering, and shape.

The padding is closed cell polyethylene foam. The same padding that is used on competition beams. It is covered with a heavy grade synthetic suede material. The material is durable and easy to clean. The work surface is 4in wide and the beam is 7in high.

The support braces are 12in wide and made of steel. The legs are painted to match the beam color. The beam core is pre-drilled for our higher metal beam legs which can be added at a later date. This will make a great practice beam.

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Legs
• Cross Grain Laminated Wood Construction
• Competition Oval Shaped Sides
• 8ft Long x 4in wide x 7in high
• Metal Legs
• Material seams on the bottom are covered with wood trim for a finished look.
• No exposed staples
• Weight Limit 250 lbs.
   

 4ft x 6ft x 2in FOLDING PANEL MAT 

Specifications:

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Support Braces
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 16 ft. Long x 4 in. wide (Made of 2 - 8ft sections)
• Weight Limit 350 lbs.

 16ft sectional suede balance beam with raised metal legs. The work surface is 4 in. wide. 

Beam height is measured from the top of the beam to the floor. It has a padded top and is covered with heavy-grade synthetic suede material. The material is durable and easy to clean. 16ft Sectional Balance Beam This beam is constructed of two 8ft sections joined in the middle and secured from the bottom and supported by a center support.

The beam is made using cross-grain laminated wood construction. This gives the beam its strength and prevents warping or twisting. The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes the padding, covering, and shape. They are made of 12 gauge structural steel with rubber end caps to protect the flooring beneath. This will make a great practice beam.

12ft Sectional Raised Balance Beam

This beam is constructed of two 6ft sections joined in the middle and secured from the bottom and supported by a center support. 

The beam is made using cross grain laminated wood construction. This gives the beam its strength and prevents warping or twisting.The core is planed and sanded to the competition oval beam shape.  Our beams are built as close as possible to competition beams for a realistic training experience.  This includes the padding, covering and shape.

The support braces for the 12" beam legs are 18 in. wide and all other beam leg heights are 24" wide.  They are made of 12 gauge structural steel with rubber end caps to protect the flooring beneath.   This will make a great practice beam.

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Support Braces
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 12 ft. Long x 4 in. wide (Made of 2 - 6ft sections)
• Steel Support Braces (Available in Four Heights 12", 18", 24" and an adjustable leg that adjust from 15" to 30" in 3" increments.) 
• Material seams on bottom are covered with wood trim for a finished look.
• No exposed staples
• Weight Limit 350 lbs.

The beam is made using cross grain laminated wood construction. This gives the beam its strength and prevents warping or twisting.  No center support is needed. The core is planed and sanded to the competition oval beam shape.  Our beams are built as close as possible to competition beams for a realistic training experience.  This includes the padding, covering and shape.

The padding is closed cell polyethylene foam.  The same padding that is used on competition beams.  It is covered with a heavy grade synthetic suede material. The material is durable and easy to clean. The work surface is 4in wide and the beam is available in four different heights.

The support braces are 24in wide and made of 12 gauge structural steel with rubber end caps to protect the flooring beneath.  This will make a great practice beam.

• Beam Includes a Set of Low Profile Legs
• Heavy Grade Synthetic Suede Covering
• Padded Top
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 8ft Long x 4in wide
• Steel Support Braces (Available in Four Heights)
• Material seams on bottom are covered
• No exposed staples
• Weight Limit 250lbs

4ft x 6ft x 2in FOLDING PANEL MAT

We reinforce all wear points such as corners. Our mat tops don't have any sewed seams except along the edges. We use 2in thick polyethylene foam.

Specifications:

• 2in Polyethelyne foam
• 4ft x 6ft x 2in Folding Panels
• Velcro on two sides
• 18 oz vinyl (Heavy Duty)

Specifications:

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Support Braces
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 16 ft. Long x 4 in. wide (Made of 2 - 8ft sections)
• Steel Support Braces (Available in Four Heights 12", 18", 24" and an adjustable leg that adjust from 15" to 30" in 3" increments.) 
• No exposed staples
• Weight Limit 350 lbs.

16ft sectional suede balance beam with raised metal legs. The work surface is 4 in. wide and the beam is available in fixed heights of 12", 18", 24" and an adjustable height 30" Leg. The adjustable 30" leg adjusts from 15" up to 30" in 3" increments.

Beam height is measured from the top of the beam to the floor. It has a padded top and is covered with a heavy grade synthetic suede material. The material is durable and easy to clean. 16ft Sectional Balance Beam This beam is constructed of two 8ft sections joined in the middle and secured from the bottom and supported by a center support.

The beam is made using cross grain laminated wood construction. This gives the beam its strength and prevents warping or twisting.The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes the padding, covering and shape. The support braces for the 12" beam legs are 18 in. wide and all other beam leg heights are 24" wide. They are made of 12 gauge structural steel with rubber end caps to protect the flooring beneath. This will make a great practice beam.

This Stall Bar is 78" High x 28" Wide with a Pull Up Bar at the top. It has 9 Rungs that are spaced 8.5" apart and are 8" from the wall.

Specifications:

• 78" High x 28” Wide
• 1.5in. Diameter Bars - Hardwood
• Steel Welded Frame
• Made in the USA
• Lifetime Warranty
• 300lb Weight Capacity
• 9 Rungs Spaced 8.5" Apart
• Bars Extend 8" from the Wall
• Pull Up Bar extends 21" from Wall
• Easy to Assemble and Mount

Available Options:

• Back Pad - Optional Back Pad available that hangs from the rungs by velcro straps.  This padding protects the body during exercises like Leg Lifts, Pull-Ups, Hanging Sit-Ups, and others.
• Heavy Duty Incline bench:  It hangs from the rungs at your chosen height.  Can be used for Sit-Ups, Leg Raises, and also in conjunction with weight training.
• Rings: 15cm Rings available as an option
• Bar Pad: Velcros to wood bar
• Suspension Straps

The Beam Store Swedish Stall Bars are made in our Factory location in Oklahoma City.  This is a top of the line Commercial Grade Stall Bar made with 14 ga. Heavy steel.  The unit weighs 70lbs and can support up to 300 lbs when properly secured to the wall.  Multiple sections can be added together along a wall.

This Stall Bar is 78" High x 28" Wide with a Pull Up Bar at the top. It has 9 Rungs that are spaced 8.5" apart and are 8" from the wall.

Stall Bars, also known as Swedish Ladder and Wall Bars, is a gymnastics apparatus that is useful for any type of athlete.

We have sold these to Schools, Gymnastics Studios, Dance Studios, Swim Clubs, Fitness Clubs; Anywhere strength, and flexibility conditioning is performed.

There are a wide variety of exercises that help develop better balance, passive and active flexibility, mobility, and strength.

Our Stall Bars are built for the rigors and stresses of commercial use and are offered at a price point that makes them affordable for home use as well.

Stall Bars offer a wide range of exercises that can help improve strength, flexibility, and overall fitness. Here are some exercises that can be done with Swedish ladders:

1. Pull-ups: Using the rungs on the top of the ladder, you can perform pull-ups to strengthen your upper body and improve grip strength.

2. Leg raises: You can perform leg raises by hanging from the rungs and raising your legs up towards your chest. This exercise targets your abs and hip flexors.

3. Wall handstands: The ladder can also be used to practice handstands against the wall. This exercise strengthens your arms, shoulders, and core.

4. Stretching: The rungs can be used to support different stretches, such as forward folds, side bends, and lunges.

5. Knee tucks: By hanging from the rungs, you can bring your knees up to your chest to work your abs.

6. L-sit: You can sit on the rungs with your legs extended in front of you to work your core and hip flexors.

7. Squats: The ladder can be used to assist with squats by holding onto the rungs for support and balance.

These are just a few examples of the many exercises that can be done with a Swedish ladder. The possibilities are endless, and the ladder can be used to create a full-body workout.

This top-of-the-line commercial-grade stall bar is manufactured in our US location in Oklahoma City. 

• Specifications:

  • 94" High x 28” Wide
  • 1.5in. Diameter Bars - Hardwood
  • Steel Welded Frame
  • Made in the USA
  • Lifetime Warranty
  • 300lb Weight Capacity
  • 10 Rungs Spaced 8.5" Apart
  • Bars Extend 8" from the Wall
  • Pull Up Bar extends 21" from Wall
  • Easy to Assemble and Mount

  Available Options:

  • Back Pad - Optional Back Pad available that hangs from the rungs by velcro straps.  This padding protects the body during exercises like Leg Lifts, Pull-Ups, Hanging Sit-Ups, and others.
  • Heavy Duty Incline bench:  It hangs from the rungs at your chosen height.  Can be used for Sit-Ups, Leg Raises, and also in conjunction with weight training.
  • Rings: 15cm Rings available as an option
  • Bar Pad: Velcros to wood bar
  • Suspension Straps

Stall Bars, also known as a Swedish Ladder and Wall Bars, is a gymnastics apparatus that is useful for any type of athlete.

We have sold these to schools, gymnastics studios, dance studios, swim clubs, fitness clubs; anywhere strength and flexibility conditioning is performed.

There are a wide variety of exercises that help develop better balance, passive and active flexibility, mobility, and strength.

Our Stall Bars are built for the rigors and stresses of commercial use and are offered at a price point that makes them affordable for home use as well.

If you purchase accessories the steel component will be the same color as the unit you purchase.  

Stall Bars offer a wide range of exercises that can help improve strength, flexibility, and overall fitness. Here are some exercises that can be done with Swedish ladders:

1. Pull-ups: Using the rungs on the top of the ladder, you can perform pull-ups to strengthen your upper body and improve grip strength.

2. Leg raises: You can perform leg raises by hanging from the rungs and raising your legs up towards your chest. This exercise targets your abs and hip flexors.

3. Wall handstands: The ladder can also be used to practice handstands against the wall. This exercise strengthens your arms, shoulders, and core.

4. Stretching: The rungs can be used to support different stretches, such as forward folds, side bends, and lunges.

5. Knee tucks: By hanging from the rungs, you can bring your knees up to your chest to work your abs.

6. L-sit: You can sit on the rungs with your legs extended in front of you to work your core and hip flexors.

7. Squats: The ladder can be used to assist with squats by holding onto the rungs for support and balance.

These are just a few examples of the many exercises that can be done with a Swedish ladder. The possibilities are endless, and the ladder can be used to create a full-body workout.

The perfect Bungee Handstand Training system for young gymnasts to learn and perfect the cast to handstand movement.  Skills Poster included

Description:

• 2" Steel Tubing
• 60" Wide
• 4 Bungee Cords
• Bungee Pad
• 2 Bungee placements to adjust tension.

This Stall Bar is 78" High x 48" Wide with a Pull Up Bar at the top. It has 9 Rungs that are spaced 8.5" apart and are 8" from the wall.

Specifications:

• 78" High x 48” Wide
• 1.5in. Diameter Bars - Hardwood
• Steel Welded Frame
• Made in the USA
• Lifetime Warranty
• 300lb Weight Capacity
• 9 Rungs Spaced 8.5" Apart
• Bars Extend 8" from the Wall
• Pull Up Bar extends 21" from Wall
• Easy to Assemble and Mount

Available Options:

• Back Pad - Optional Back Pad available that hangs from the rungs by velcro straps.  This padding protects the body during exercises like Leg Lifts, Pull-Ups, Hanging Sit-Ups, and others.
• Heavy Duty Incline bench:  It hangs from the rungs at your chosen height.  Can be used for Sit-Ups, Leg Raises, and also in conjunction with weight training.
• Rings: 15cm Rings available as an option
• Bar Pad: Velcros to wood bar
• Suspension Straps

The Beam Store Swedish Stall Bars are made in our factory location in Oklahoma City.  This is a top of the line Commercial Grade Stall Bar made with 14 ga. Heavy steel.  The unit weighs 70lbs and can support up to 300 lbs when properly secured to the wall.  Multiple sections can be added together along a wall.

This Stall Bar is 78" High x 48" Wide with a Pull Up Bar at the top. It has 9 Rungs that are spaced 8.5" apart and are 8" from the wall.

Stall Bars, also known as a Swedish Ladder and Wall Bars, is a gymnastics apparatus that is useful for any type of athlete.

We have sold these to Schools, Gymnastics Studios, Dance Studios, Swim Clubs, Fitness Clubs; Anywhere strength and flexibility conditioning is performed.

There are a wide variety of exercises that help develop better balance, passive and active flexibility, mobility, and strength.

Our Stall Bars are built for the rigors and stresses of commercial use and are offered at a price point that makes them affordable for home use as well.

Stall Bars offer a wide range of exercises that can help improve strength, flexibility, and overall fitness. Here are some exercises that can be done with Swedish ladders:

1. Pull-ups: Using the rungs on the top of the ladder, you can perform pull-ups to strengthen your upper body and improve grip strength.

2. Leg raises: You can perform leg raises by hanging from the rungs and raising your legs up towards your chest. This exercise targets your abs and hip flexors.

3. Wall handstands: The ladder can also be used to practice handstands against the wall. This exercise strengthens your arms, shoulders, and core.

4. Stretching: The rungs can be used to support different stretches, such as forward folds, side bends, and lunges.

5. Knee tucks: By hanging from the rungs, you can bring your knees up to your chest to work your abs.

6. L-sit: You can sit on the rungs with your legs extended in front of you to work your core and hip flexors.

7. Squats: The ladder can be used to assist with squats by holding onto the rungs for support and balance.

These are just a few examples of the many exercises that can be done with a Swedish ladder. The possibilities are endless, and the ladder can be used to create a full-body workout.

This Stall Bar is 94" High x 48" Wide with a Pull Up Bar at the top. It has 10 Rungs that are spaced 8.5" apart and are 8" from the wall.

Specifications:

• 94" High x 48” Wide
• 1.5in. Diameter Bars - Hardwood
• Steel Welded Frame
• Made in the USA
• Lifetime Warranty
• 300lb Weight Capacity
• 9 Rungs Spaced 8.5" Apart
• Bars Extend 8" from the Wall
• Pull Up Bar extends 21" from Wall
• Easy to Assemble and Mount

Available Options:

• Back Pad - Optional Back Pad available that hangs from the rungs by velcro straps.  This padding protects the body during exercises like Leg Lifts, Pull-Ups, Hanging Sit-Ups, and others.
• Heavy Duty Incline bench:  It hangs from the rungs at your chosen height.  Can be used for Sit-Ups, Leg Raises, and also in conjunction with weight training.
• Rings: 15cm Rings available as an option
• Bar Pad: Velcros to wood bar
• Suspension Straps

The Beam Store Swedish Stall Bars are made in our Factory location in Oklahoma City.  This is a top of the line Commercial Grade Stall Bar made with 14 ga. Heavy steel.  The unit weighs 70lbs and can support up to 300 lbs when properly secured to the wall.  Multiple sections can be added together along a wall.

This Stall Bar is 94" High x 48" Wide with a Pull Up Bar at the top. It has 10 Rungs that are spaced 8.5" apart and are 8" from the wall.

Stall Bars, also known as a Swedish Ladder and Wall Bars, is a gymnastics apparatus that is useful for any type of athlete. 

We have sold these to Schools, Gymnastics Studios, Dance Studios, Swim Clubs, Fitness Clubs; Anywhere strength, and flexibility conditioning is performed.

There are a wide variety of exercises that help develop better balance, passive and active flexibility, mobility, and strength.

Our Stall Bars are built for the rigors and stresses of commercial use and are offered at a price point that makes them affordable for home use as well.

Stall Bars offer a wide range of exercises that can help improve strength, flexibility, and overall fitness. Here are some exercises that can be done with Swedish ladders:

1. Pull-ups: Using the rungs on the top of the ladder, you can perform pull-ups to strengthen your upper body and improve grip strength.

2. Leg raises: You can perform leg raises by hanging from the rungs and raising your legs up towards your chest. This exercise targets your abs and hip flexors.

3. Wall handstands: The ladder can also be used to practice handstands against the wall. This exercise strengthens your arms, shoulders, and core.

4. Stretching: The rungs can be used to support different stretches, such as forward folds, side bends, and lunges.

5. Knee tucks: By hanging from the rungs, you can bring your knees up to your chest to work your abs.

6. L-sit: You can sit on the rungs with your legs extended in front of you to work your core and hip flexors.

7. Squats: The ladder can be used to assist with squats by holding onto the rungs for support and balance.

These are just a few examples of the many exercises that can be done with a Swedish ladder. The possibilities are endless, and the ladder can be used to create a full-body workout.

A common question we are asked is " Why is this beam so much more than your 8ft beams". The reason for the cost difference is the beams weight, construction method and cost to ship. This beam weighs 140 lbs vs 42lbs for our 8ft beams. Because we have a longer span between the beam legs the beam must be much stronger and a different construction method and additional materials are used. The weight capacity also increases to 300 lbs. Because of the length of the beam it must be shipped with a freight carrier as opposed to FedEx or UPS and this substantially increases the cost to ship. It is shipped in a large wooden crate to eliminate damage.

10ft suede balance beam with raised metal legs. The work surface is 4 in. wide and the beam is available in fixed heights of 12", 18", 24" and an adjustable height 30" Leg.  The adjustable 30" leg adjusts from 15" up to 30" in 3" increments. 

Beam height is measured from the top of the beam to the floor.

The beam is made using cross-grain laminated wood construction. This gives the beam its strength and prevents warping or twisting.  No center support is needed. The core is planed and sanded to the competition oval beam shape.  Our beams are built as close as possible to competition beams for a realistic training experience.  This includes the padding, covering, and shape.

The padding is closed cell polyethylene foam.  The same padding that is used on competition beams.  It is covered with heavy-grade synthetic suede material. The material is durable and easy to clean. The work surface is 4 in. wide.

The support braces for the 12" beam legs are 18" wide and all other beam leg heights are 24" wide.  They are made of 12 gauge structural steel with rubber end caps to protect the flooring beneath.   This will make a great practice beam.

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Support Braces
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 10 ft. Long x 4 in. wide
• Steel Support Braces (Available in Four Heights) 
• Material seams on the bottom are covered with wood trim for a finished look.
• No exposed staples
• Weight Limit 300 lbs.

This item ships with a Freight service.  Transit time is 5-10 days.  When your package is scanned for shipment you will receive tracking information at the email address you provide during the checkout process. This item ships in two boxes. Box 1 Dimensions: 126" x10" x10" Weight 120 lbs Box 2 Dimensions: 24'x24"x4" Weight 24 lbs 

Specifications:

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Support Braces
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 16 ft. Long x 4 in. wide (Made of 2 - 8ft sections)
• Steel Support Braces (Available in Four Heights 12", 18", 24" and an adjustable leg that adjust from 15" to 30" in 3" increments.) 
• No exposed staples
• Weight Limit 350 lbs.

4' x 20' x 2" CUSTOM FOLDING PANEL MAT

Mat configuration is a custom design from The Beam Store. The mats cover the metal beam legs and extend past the end of the beam on both ends. This provides 100% mat coverage around the beam.

All of our folding mats are designed and manufactured with the best materials available. We don't make different quality mats such as "regular" and "firm". All of our mats will be what other companies sell as their best "firm" mat. We use 18 oz. vinyl coated nylon (heavy vinyl) for the cover.

We reinforce all wear points such as corners. Our mat tops don't have any sewed seams except along the edges. We use 2" thick polyethylene foam.

• 4' x 20' Folding Panels
• Velcro on two sides
• 18 oz vinyl (Heavy Duty)

16ft sectional suede balance beam with raised metal legs. The work surface is 4 in. wide and the beam is available in fixed heights of 12", 18", 24" and an adjustable height 30" Leg. The adjustable 30" leg adjusts from 15" up to 30" in 3" increments.

Beam height is measured from the top of the beam to the floor. It has a padded top and is covered with a heavy grade synthetic suede material. The material is durable and easy to clean. 16ft Sectional Balance Beam This beam is constructed of two 8ft sections joined in the middle and secured from the bottom and supported by a center support.

The beam is made using cross grain laminated wood construction. This gives the beam its strength and prevents warping or twisting.The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes the padding, covering and shape. The support braces for the 12" beam legs are 18 in. wide and all other beam leg heights are 24" wide. They are made of 12 gauge structural steel with rubber end caps to protect the flooring beneath. This will make a great practice beam.

This item ships with a Freight Service due to the product length.  Please allow 10 -15 days for delivery.

A common question we are asked is " Why is this beam so much more than your 8ft beams". The reason for the cost difference is the beams weight, construction method and cost to ship. This beam weighs 140 lbs vs 42lbs for our 8ft beams. Because we have a longer span between the beam legs the beam must be much stronger and a different construction method and additional materials are used. The weight capacity also increases to 300 lbs. Because of the length of the beam it must be shipped with a freight carrier as opposed to FedEx or UPS and this substantially increases the cost to ship. It is shipped in a large wooden crate to eliminate damage.

12ft suede balance beam with raised metal legs. The work surface is 4 in. wide and the beam is available in fixed heights of 12", 18", 24" and an adjustable height 30" Leg.  The adjustable 30" leg adjusts from 15" up to 30" in 3" increments. 

Beam height is measured from the top of the beam to the floor.

The beam is made using cross-grain laminated wood construction. This gives the beam its strength and prevents warping or twisting.  No center support is needed. The core is planed and sanded to the competition oval beam shape.  Our beams are built as close as possible to competition beams for a realistic training experience.  This includes the padding, covering, and shape.

The padding is closed cell polyethylene foam.  The same padding that is used on competition beams.  It is covered with heavy-grade synthetic suede material. The material is durable and easy to clean. The work surface is 4 in. wide.

The support braces for the 12" beam legs are 18" wide and all other beam leg heights are 24" wide.  They are made of 12 gauge structural steel with rubber end caps to protect the flooring beneath.   This will make a great practice beam.

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Support Braces
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 12 ft. Long x 4 in. wide
• Steel Support Braces (Available in Four Heights) 
• Material seams on the bottom are covered with wood trim for a finished look.
• No exposed staples
• Weight Limit 300 lbs.

This item ships with a Freight service.  Transit time is 5-10 days.  When your package is scanned for shipment you will receive tracking information at the email address you provide during the checkout process. 

The beam is made using cross-grain laminated wood construction. This gives the beam its strength and prevents warping or twisting.  No center support is needed. The core is planed and sanded to the competition oval beam shape.  Our beams are built as close as possible to competition beams for a realistic training experience.  This includes padding, covering, and shape. 

The padding is closed cell polyethylene foam.  The same padding that is used on competition beams.  It is covered with a heavy grade synthetic suede material. The material is durable and easy to clean. The work surface is 4 in. wide.  

The support braces are 12 in. wide and made of 12 gauge structural steel with rubber end caps to protect the flooring beneath.  Also included with the beam are a set of our low profile legs. This will make a great practice beam. 

Beginners Velcro Grips

To order our Beginner Grips, take a measurement, in inches, from the wrist to the base of the fingers.

Sizing Chart For Velcro Beginner Grips

Size - Measurement
XS - Less Than 2 7/8"
S - 2 7/8"
M - 3 3/8"
L - 3 3/4"

Order the size closest to your measurement. If your measurement falls exactly between sizes, order the smaller size.

• Beam Includes a Set of Low Profile Legs
• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Support Braces
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Competition Oval Shaped Sides
• 8 ft. Long x 4 in. wide 
• Steel Support Braces 4 Different Heights to Choose From
• No exposed staples
• Weight Limit 250 lbs. 

 FOLDING PANEL MAT AND ELITE HIGH BAR MATS 

Specifications:

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Support Braces
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 16 ft. Long x 4 in. wide (Made of 2 - 8ft sections)
• Steel Support Braces (Available in Four Heights 12", 18", 24" and an adjustable leg that adjust from 15" to 30" in 3" increments.) 
• No exposed staples
• Weight Limit 350 lbs.

4' x 20' x 2" CUSTOM FOLDING PANEL MAT

Mat configuration is a custom design from The Beam Store. The mats cover the metal beam legs and extend past the end of the beam on both ends. This provides 100% mat coverage around the beam.

All of our folding mats are designed and manufactured with the best materials available. We don't make different quality mats such as "regular" and "firm". All of our mats will be what other companies sell as their best "firm" mat. We use 18 oz. vinyl coated nylon (heavy vinyl) for the cover.

We reinforce all wear points such as corners. Our mat tops don't have any sewed seams except along the edges. We use 2" thick polyethylene foam.

• 4' x 20' Folding Panels
• Velcro on two sides
• 18 oz vinyl (Heavy Duty)

16ft sectional suede balance beam with raised metal legs. The work surface is 4 in. wide and the beam is available in fixed heights of 12", 18", 24" and an adjustable height 30" Leg. The adjustable 30" leg adjusts from 15" up to 30" in 3" increments.

Beam height is measured from the top of the beam to the floor. It has a padded top and is covered with a heavy grade synthetic suede material. The material is durable and easy to clean. 16ft Sectional Balance Beam This beam is constructed of two 8ft sections joined in the middle and secured from the bottom and supported by a center support.

The beam is made using cross grain laminated wood construction. This gives the beam its strength and prevents warping or twisting.The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes the padding, covering and shape. The support braces for the 12" beam legs are 18 in. wide and all other beam leg heights are 24" wide. They are made of 12 gauge structural steel with rubber end caps to protect the flooring beneath. This will make a great practice beam.