8ft Beams

We manufacture the best training beam in the world!

Here's why:

Strength - Wood core with a weight capacity of 250lbs. No center support is needed and this allows a mat to slide underneath the beam. We use almost twice as much wood in our beam as our nearest competitor. The beam won't flex or bend when doing leaps or jumps.

Padding - We use the same padding as competition beams. This gives a realistic feeling on her feet and makes it easy to go from a training beam to a competition beam.

Cover - Heavy grade suede. Provides excellent durability and great non-slip traction.

Shape - Our beams have curved sides just like competition beams. This will affect her hand grip and provides a more realistic training experience.

Reinforced Ends - This is where most of the wear occurs on beams. This feature will greatly extend the life of your beam

Warranty - All of our beams come with a two-year transferrable warranty.

Safety - All of our beam designs have been tested. Support braces are made of steel with rubber pads. Custom matting is available to go all the way around the beam.



The beam is made using cross-grain laminated wood construction. This gives the beam its strength and prevents warping or twisting. No center support is needed. The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes the padding, covering, and shape.

The padding is closed cell polyethylene foam. The same padding that is used on competition beams. It is covered with heavy-grade synthetic suede material. The material is durable and easy to clean. The work surface is 4 in. wide and the beam is available in four different heights.

The support braces are 18in wide and made of 12 gauge structural steel with rubber end caps to protect the flooring beneath. Also included with the beam are a set of our low-profile legs. This will make a great practice beam.

• Beam Includes a Set of Low Profile Legs
• Heavy Grade Synthetic Suede Covering
• Padded Top
• Felt Padding on Support Braces
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 8ft Long x 4in wide
• Steel Support Braces (Available in Four Heights)
• Material seams on the bottom are covered with wood trim for a finished look.
• No exposed staples
• Weight Limit 250lbs
• Proudly Made in the USA

12ft Sectional Raised Balance Beam

This beam is constructed of two 6ft sections joined in the middle and secured from the bottom and supported by a center support. 

The beam is made using cross grain laminated wood construction. This gives the beam its strength and prevents warping or twisting.The core is planed and sanded to the competition oval beam shape.  Our beams are built as close as possible to competition beams for a realistic training experience.  This includes the padding, covering and shape.

The support braces for the 12" beam legs are 18 in. wide and all other beam leg heights are 24" wide.  They are made of 12 gauge structural steel with rubber end caps to protect the flooring beneath.   This will make a great practice beam.

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Support Braces
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 12 ft. Long x 4 in. wide (Made of 2 - 6ft sections)
• Steel Support Braces (Available in Four Heights 12", 18", 24" and an adjustable leg that adjust from 15" to 30" in 3" increments.) 
• Material seams on bottom are covered with wood trim for a finished look.
• No exposed staples
• Weight Limit 350 lbs.

Specifications:

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Support Braces
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 16 ft. Long x 4 in. wide (Made of 2 - 8ft sections)
• Steel Support Braces (Available in Four Heights 12", 18", 24" and an adjustable leg that adjust from 15" to 30" in 3" increments.) 
• No exposed staples
• Weight Limit 350 lbs.

16ft sectional suede balance beam with raised metal legs. The work surface is 4 in. wide and the beam is available in fixed heights of 12", 18", 24" and an adjustable height 30" Leg. The adjustable 30" leg adjusts from 15" up to 30" in 3" increments.

Beam height is measured from the top of the beam to the floor. It has a padded top and is covered with a heavy grade synthetic suede material. The material is durable and easy to clean. 16ft Sectional Balance Beam This beam is constructed of two 8ft sections joined in the middle and secured from the bottom and supported by a center support.

The beam is made using cross grain laminated wood construction. This gives the beam its strength and prevents warping or twisting.The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes the padding, covering and shape. The support braces for the 12" beam legs are 18 in. wide and all other beam leg heights are 24" wide. They are made of 12 gauge structural steel with rubber end caps to protect the flooring beneath. This will make a great practice beam.