Balance Beams Low

We manufacture the best training beam in the world!

Here’s why:

Strength – Wood core with a weight capacity of  250lbs.  No center support is needed and this allows a mat to slide underneath the beam.  We use almost twice as much wood in our beam as our nearest competitor.  The beam won’t flex or bend when doing leaps or jumps.

Padding - We use the same padding as competition beams.  This gives a realistic feeling on her feet and makes it easy to go from a training beam to a competition beam.

Cover – Heavy grade suede.  Provides excellent durability and great non-slip traction.

Shape - Our beams have curved sides just like competition beams.  This will affect her hand grip and provides a more realistic training experience.

Reinforced Ends -   This is where most of the wear occurs on beams.  This feature will greatly extend the life of your beam

Warranty – All of our beams come with a two-year transferrable warranty.

Safety -   All of our beam designs have been tested.  Support braces are made of steel with rubber pads.  Custom matting is available to go all the way around the beam.

The beam is made using cross-grain laminated wood construction. This gives the beam its strength and prevents warping or twisting. No center support is needed. The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes padding, covering, and shape.

The padding is closed cell polyethylene foam. The same padding that is used on competition beams. It is covered with a heavy grade synthetic suede material. The material is durable and easy to clean. The work surface is 4in. wide and the beam is 7in high.

The support braces are 12in wide and made of steel. The beam core is pre-drilled for our higher metal beam legs which can be added at a later date. This will make a great practice beam.

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Legs
• Cross Grain Laminated Wood Construction
• Competition Oval Shaped Sides
• 8ft  x 4in wide x 7in high
• Metal Legs
• Material seams on the bottom are covered
• No exposed staples
• Weight Limit 250lbs

This beam is an 12ft Low Profile section beam. It is made up of two 6ft Sections.  It has a third support in the middle that is the width of the beam and completely hidden underneath.  Our raised beam legs can be added to this beam at any time.

The beam is made using cross grain laminated wood construction.  The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes the padding, covering and shape.

The padding is closed cell polyethylene foam. The same padding that is used on competition beams. It is covered with a heavy grade synthetic suede material. The material is durable and easy to clean. The work surface is 4 in. wide and the beam is 7 in high.

 The support braces are 12 in. wide and made of steel. The beam core is pre-drilled for our higher metal beam legs which can be added at a later date. This will make a great practice beam.

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Legs
• Cross Grain Laminated Wood Construction
• Competition Oval Shaped Sides
• 12 ft. Long x 4 in. wide x 7 in. high
• Metal Legs
• Material seams on bottom are covered with wood trim for a finished look.
• No exposed staples
• Weight Limit 250 lbs. 

Specifications:

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Support Braces
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 16 ft. Long x 4 in. wide (Made of 2 - 8ft sections)
• Weight Limit 350 lbs.

 16ft sectional suede balance beam with raised metal legs. The work surface is 4 in. wide. 

Beam height is measured from the top of the beam to the floor. It has a padded top and is covered with heavy-grade synthetic suede material. The material is durable and easy to clean. 16ft Sectional Balance Beam This beam is constructed of two 8ft sections joined in the middle and secured from the bottom and supported by a center support.

The beam is made using cross-grain laminated wood construction. This gives the beam its strength and prevents warping or twisting. The core is planed and sanded to the competition oval beam shape. Our beams are built as close as possible to competition beams for a realistic training experience. This includes the padding, covering, and shape. They are made of 12 gauge structural steel with rubber end caps to protect the flooring beneath. This will make a great practice beam.

A common question we are asked is " Why is this beam so much more than your 8ft beams". The reason for the cost difference is the beams weight, construction method and cost to ship. This beam weighs 140 lbs vs 42lbs for our 8ft beams. Because we have a longer span between the beam legs the beam must be much stronger and a different construction method and additional materials are used. The weight capacity also increases to 300 lbs. Because of the length of the beam it must be shipped with a freight carrier as opposed to FedEx or UPS and this substantially increases the cost to ship. It is shipped in a large wooden crate to eliminate damage.

10ft suede balance beam with raised metal legs. The work surface is 4 in. wide and the beam is available in fixed heights of 12", 18", 24" and an adjustable height 30" Leg.  The adjustable 30" leg adjusts from 15" up to 30" in 3" increments. 

Beam height is measured from the top of the beam to the floor.

The beam is made using cross-grain laminated wood construction. This gives the beam its strength and prevents warping or twisting.  No center support is needed. The core is planed and sanded to the competition oval beam shape.  Our beams are built as close as possible to competition beams for a realistic training experience.  This includes the padding, covering, and shape.

The padding is closed cell polyethylene foam.  The same padding that is used on competition beams.  It is covered with heavy-grade synthetic suede material. The material is durable and easy to clean. The work surface is 4 in. wide.

The support braces for the 12" beam legs are 18" wide and all other beam leg heights are 24" wide.  They are made of 12 gauge structural steel with rubber end caps to protect the flooring beneath.   This will make a great practice beam.

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Rubber End Caps on Support Braces
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 10 ft. Long x 4 in. wide
• Steel Support Braces (Available in Four Heights) 
• Material seams on the bottom are covered with wood trim for a finished look.
• No exposed staples
• Weight Limit 300 lbs.

This item ships with a Freight service.  Transit time is 5-10 days.  When your package is scanned for shipment you will receive tracking information at the email address you provide during the checkout process. This item ships in two boxes. Box 1 Dimensions: 126" x10" x10" Weight 120 lbs Box 2 Dimensions: 24'x24"x4" Weight 24 lbs